The thermometer I have looked at goes up to 550C and the melting point of aluminium is around 660C but the rods talk about a temperature of less than 480C so there is a decent amount of wiggle room there. I suspect that it is a two person job - one to heat and monitor the temperature and the other poised to apply the rod. The thermometer is a laser infrared job so non-contact and instant - the trick I guess is to get the temperature just right across the workpiece.
Aluminium oxide starts to form quickly at around 450C so the final 30C gain needs to be done quickly. The other thing is making sure that the aluminium doesn’t anneal - in my application for my pannier lids this is not a big deal but other applications may not be so forgiving.
|