What model and year is your bike? Did you check your kill switch, I've been guilty of not noticing it in the off position myself.....
If you have an older bike, like 84 to 89, it will have the older CDI under the tank between the frame plates behind the steering head. There is a Black with white stripe wire. This is a kill wire that the ignition and the handlebar kill switch will ground to kill the engine. If you unplug it, that takes away anything kill wise that could be at fault.
If you have a side stand switch, follow the wiring up to where it plugs into the main harness, unplug both wires and on the harness side, plug the wires together as they are male and female. This will bypass the side stand switch. Check the multiple wires going to the stator, there is a plug and 2 individual wires. Make sure they are clean and seated well in the connectors.
If you have a newer TCI ignition it will have connection plugs built right in to the unit. I cannot speak to that as I've not had experience but same common sense approach to checking wires plugged in completely and not corroded.
Lets us know how it goes....
Steve
__________________
'84 XT600 is now bored to 2nd oversize and new OEM pistons and rings installed. No more smoking.
|