Hi Andy!
well, it was pretty easy infact..
All you have to do is press out the YZ's bottom steering bearing and press in the XT's bottom steering bearing on to the steering stem...
After that you have to slide in the front suspension with the lower triple clamp on to the frame and see how much you have to machine the steering stem so the XT's top steering bearing slides further enough so you get a good lock without gaps.
After that, you'll have to machine some thread right above where the top steering bearing spins (it has to be above!) so you can use the locknuts to tighten everything in place!
Last part is to fit the top triple clamp and tighten everything in place...
And yes, I used the whole front end including brakes and wheel!
Vando
|