Hi Mate ,
I work for Remus Exhaust Australia and i have fitted a freeride stainless slip on muffler to my XT 600E. Its a very easy installation as follows ,
Remove Side Cover and Seat , loosen the muffler clamp fitted to the OEM muffler that secures the header remove the 2 frame mounted bolts that secure the muffler to the bike.
Slide the factory muffler off the OEM , i had to use a screwdriver and mallet to remove it .
To install is easy all harware comes with the Remus muffler slide the new remus pipe over the factory header do not tighten , grab the carbon fibre clamp and bolt it to the factory mounting point that is closest to the side cover NOT the one near the fear fender . secure the muffler to this mounting point and tighten then tighten the muffler connecting tube to the factory header with the sluppied allen key .
Ride the bike for approx 100 klm and re torque the allen key bolt .
|