Quote:
Originally Posted by juuz0
I have a ZUMO 350 what does not charge in cradle. But charge with USB power
The fault is not in the cradle or power to cradle!
This is what I found on another forum
"Did you charge it with a non-Garmin wall charger?
This will cause it to go into mass storage mode and it won't come out until a PC comes to negotiate with it."
This could be the case because the fault came up after I had connected the ZUMO to my PC. So ZUMO might think it is in mass storage mode
The fix was to do a factory reset, what does not delete your POIs or maps. And it started charging again in the cradle
I hope this was the case and someone can save some money from replacing the cradle or cables.
|
Was working after fix for one day, and now the problem is back
So it has to be the cradle
Its going to cost me some money
|