You need a compression tester,and an adapter that fits your spark plug thread. Most car/bike shops have these.
1. Screw in adapter into spark plug hole.
2. Fit tester into adapter.
3. Remove air filter for better air flow
4. Turn off fuel
5. Make sure ignition is off
6. Hold throttle wide open and kick engine over.
Where the needle peaks is the compression of the engine.
If bike doesn't have a kickstarter do one of the following.
A Fit a kickstarter
B Ghostie bike off a cliff into the sea and buy a bike with a kickstarter, since if you plan on hitting the outback you definetely need a kickstarter.
|