Found the problem!
The XT600E stock computer/display/manometer has several small bulbs.
One of the bulbs is the Turn signals warning light.
On the XT that warning light has TWO POSITIVES connect to it!
And , with my knowledge, the only way that bulb can work is if internally, on the bulb socket there is a ground!
On the Trailtech Vapor indicator dashboard, with the same scheme it doesn't work and makes the 4 turn signals blink at the same time!
So my question now is:
Is there a relay or something similar to a flasher relay that I can connect the two positives (one from each turn signal) and outputs one positive?
The output positive would be the hot wire (with the positive signal from either the left or the right)...
Anyone? :confused1:
|