Sorry for the lack of etiquette, let me provide a little background. I live in south Louisiana and found this bike on Craigslist listed as scrap. The carb and starter were in pieces and left outside for quite some time. After going through the carb and starter, and having the valves relapped by a machine shop, and a few other minor details the bike has ran great. The bike looks pretty rough, missing and cracked plastic and such, but gets used daily for farm work.
The po was using vice grips to shift, but had the original shift lever. Although the shifter and shaft were stripped I was able replace the bolt in the shift lever with a larger one and got by for awhile.
I ordered a new shaft, lever and seal not realizing the crankcase had to be split to change. I won't have time to split the case for a couple months.
Although this is my first post, I have read the majority of the posts on Yamaha tech to get this bike running. I found very little pertaining to the shift shaft.
Thanks to all who have contributed. I'm sure there's many who lurk, but the info's in previous posts so no need to make a new post. Also, confident enough with tools to try....
|