hi Niko,
How are you getting on with the pilot screw setting?
I have just taken another look at my cd; there are two recommended settings, depending which bit of the data is read! One says 3.5 turns out from fully in and the other says 2.75 +/- 0.5 turn. This is for a 2004 TT600RE with the 3AJ engine.
I deduce that a movement of around, say, 1/2 turn either way in adjusting is a reasonable way forward (and a full turn in total is not un-reasonable).
Suggest you search in here for "setting the idle screw" or pilot screw - there is lots of information in more detail.
Cheers,
Dave
__________________
Dave
|