Do the basics first!!!
Quote:
Originally Posted by Jens Eskildsen
Check the valves and other "easy"parts before you dig into the engine 
|
Thanks for the advice Jens  ...I am a chronic over thinker...so its good to be reminded of the basics. Went ahead an checked the valves yesterday and one intake valve seemed extremely tight. Both exhaust valves being a little tight as well.
This time it paid off too, previous readings were near 100psi and now are...
Pulled the plug in the process and regapped. Not a pro at reading plugs but it seemed to look good.
Fired it up and sounded way better. Took it for a spin around the block and most of the "clanking" has gone away. Bike seems to even have more power then before.
|