interchangeable parts
Does anyone know if a 34K01 barrel will fit an XT600a (similar to the 600E but kickstart model)
My engine is marked as a 3TB and it matches the frame, there are a hell of a lot of mix and match parts including 1VJ valves, the barrel is marked as a 3AJ00, the oil pump is a 1VJ as is the left casing. The conrod was originally marked 3TB but I've fitted one off a 3AJ/1VJ, only difference is the shims either side of the big end.
This was done after a heat seize through no oil. The 34k barrel/piston (assuming it fits) is the next in the process of elimination.
If it does fit, I get a usable bike over winter until I have the funds for the original crank to have a new conrod kit fitted and a rebore on the original barrel with a new piston etc.
Gordon
Last edited by binfer; 20 Nov 2011 at 11:07.
|