Quote:
Originally Posted by G600
Thanks guys, very good info.
I might be wrong, but for now I am pretty sure the solenoid itself is the problem. It always “clicks” when I push the button, but only seems to connect the starting circuit now and then. The voltage to the battery is normal when the bike is running, and the battery itself has good power. The starter motor turns strongly when it reacts at all. It works well or not at all if you know what I mean.
I did order a solenoid today, I should get it in a few days.
Thanks again, it is always really helpful to get some input from you guys.
|
As you probably know from reading the forum or even your own experiences the wiring/connectors seem crap on these bikes so after my mate fixed it I separated every connector on the bike cleaned up some of the slightly dodgy ones and put loads of petroleum jelly on them and its given me a certain piece of mind. when you say it only connects to the starting circuit now and then could indicate a bad connection. Ive not had these problems on any of my bikes before and I used to run nearly 30 year old RD's ( fuse boxes fell apart on them though  )
__________________
Yamaha TT600RE 2004
Yamaha YZ250 2 stroke 99
|