Thanks again for the suggestions and I will look into getting an inline filter; I was going to do that some time ago but it got overtaken by a leaking base gasket.
I have read somewhere on here that the paper based ones can disintegrate and then block the fuel line or, worse still, the carb jets so I was a bit put off by that & then it was forgotten!
Getting the carbs off the TTR is really bad: even slacking off the subframe (as suggested to me in an earlier thread & I did it) did not help a lot because there is a damn big main frame cross member welded in right behind the carbs - this is so close on my bike that the carb diaphragm cover is touching that cross member + the oil tank underneath provides little room for manouvering in that direction. Hey ho!!
Dave
__________________
Dave
|