More news from the front:
- Lowering of the needle to standard position has not totally solved the problem, I
- When lowering the needle I also replaced the plug with the standard type, this led to a too white plug. Although the bike has 65000 kms. and the carb looks 'used' enrichment seems not the problem. I have put the needle back on the 4th notch from top, ehere I found it.
- The problem only occurs at a certain engine load, see earlier e-mail, above and below engine runs fine.
- Resistance check of the pickup and source coil indicated source coil (brown and red) OK, pickup coils (red/white, green/white) too high resistance, although not more than 50 ohms. So what does this this say?
Txs for all the advice and I will keep you posted.
Auke
|