It all depends how it was welded and how much room you have .
You may not have enough room to get a grinder in there .
If that is the case ,then take it to a competent welder and have him air arc [ gouge ] the weld off .
Put wet rags around the gearbox shaft to keep everything cool and to stop any fire from starting .
If you are going to grind it off , use a very thin disc , like a ZIPCUT and cut through the weld rather than grind it down .
You might be able to find a small dremel type tool that will get into a tight space .
__________________
Blessed are the cracked, for they let in the light. - Spike Milligan
"When you come to a fork in the road ,take it ! When you come to a spoon in the road ,take that also ."
|