Thanks for replys
I have tried to remove bleed nipple by banging a torex drive in and using an impact driver ,its still stuck and now theres nothing to weld to.
The caliper still works and I have bleed brake by undoing banjo bolt.I will get a banjo bolt with bleed nipple but would really like to get the old nipple out.
I have been told not to drill out as if you go to far the caliper will be damaged and wont seal.
I am going to a bike rally at weekend so should be able to pick up another caliper, does any one know what other yamahas use the same caliper?
I also had a bit of play on the rear brake pedal it moved side to side.I was quoted £34 for new pedal, the shaft would also need replacing.
I removed pedal wrapped a bit of tin can around shaft and replaced pedal,its now perfect.
|