Oil don't flow, please help
I worked out a big service on my XT600, cylinder, clutch, magneto etc.
Also put the oil in the oil tank. A bit less than a 2L managed to fit. Started the engine 2nd kick but the oil won't start to flow! On the bolt near oil filter where you suppose to check it nothing's coming out and the oil even can't even make it to the oil filter.
During the service I've taken off the oil pump. I put some oil in it but after that i moved the machine a bit, it's possible that oil got away from the oil passages and that the air filled it's space. Pump was working, I checked.
Is there any "trick" to make the oil flow? It would be a pain in the ass to again dissasemble the whole thing to the oil pump and put oil in.
Btw, oil is 20W50, medium thick...
|