
2 Dec 2015
|
 |
Registered Users
Veteran HUBBer
|
|
Join Date: Aug 2013
Location: Sunderland
Posts: 242
|
|
Quote:
Originally Posted by 34Lima
Thanks for all that, it should keep me occupied for a while trying different things, I've definitely walked away from it a few times!
It does backfire sometimes when I have been kicking it with the choke on for a while but once it starts it runs OK, has to get warmed up before it will idle. It also backfires when I stop it using the switch on the throttle but not usually when I turn it off using the key.
I rebuilt it a few months back from a bit of a basket case and the inlet rubbers seemed OK but I will check them again, it also had a carb service kit at the same time, float needle seals etc.
|
Under the float there is a filter sometimes this is missed when a carb service is done,
Remove the float take out the bullet shape fuel cut off valve under there is a mesh filter you will find that some dirt or some obstruction in there clean put back together, try that
|