Build your own dissasembling thingy... I built one of my own so I could put a yamaha DT125R "lights, blinkers and horn control" that has an OFF smitch so I could turn off the lights  Of course I had to work around with the cables..but you only have to use some logic and it will work 100% perfect!
you just need a scalpel blade... you have to work on the blade so it gets small enough and long enough to go in the plug on the smallest part of that cable you want to take off....
Follow as the numbers on the images:
#1-> In this one you can see the smallest part of the plug were you'll have to put the scalpel blade in.
#2 and 3-> Put the scalpel on the front of the plug on the smallest part and push in about 6 or 7 mm or what it takes so you can pull the cable easily.
#4-> cable pulled out.....
the last picture is of two equal scalpel blades.. see how it looks like...
Hope this helps
Happy riding!
|