Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Yamaha Tech
Yamaha Tech Originally the Yamaha XT600 Tech Forum, due to demand it now includes all Yamaha's technical / mechanical / repair / preparation questions.
Photo by Ulrike Hahnel, Rock Formations on the Lagune Route, Bolivia

I haven't been everywhere...
but it's on my list!


Photo by Ulrike Hahnel,
Rock Formations on the
Lagune Route, Bolivia



Like Tree2Likes

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 30 Aug 2018
Registered Users
Veteran HUBBer
 
Join Date: Jul 2016
Location: Obidos, Portugal
Posts: 134
Cracks in axle holder

While cleaning up the front end of my '97 XT I noticed these hairline cracks on the axle holder. I'm not aiming to cut corners on a bit that keeps my front wheel where I like it to be, but the only place I've found a replacement is MSP where the cost with P&P is going to be 50 euros. This seems excessive for a small slab of alu so I wondered if anyone has had any success with welding or repairing these? The cracks do not show on the underside but are clear to see on the top side.
Attached Thumbnails
Cracks in axle holder-axle-holder-for-posting.jpg  

Reply With Quote
  #2  
Old 31 Aug 2018
xtrock's Avatar
Registered Users
Veteran HUBBer
 
Join Date: May 2013
Location: Norway
Posts: 1,364
Buy new, you dont want to have front wheel coming off one side.

https://www.ebay.co.uk/itm/YZ250WR-Y...cAAOSwZrdbPA5v
Reply With Quote
  #3  
Old 31 Aug 2018
Registered Users
Veteran HUBBer
 
Join Date: May 2013
Location: Wisconsin, USA
Posts: 827
That comes from tightening the cap wrong . If you look at how the cap and fork leg boss line-up you'll see the top of the cap is meant to sit flat and the bottom is where the tightening occurs . The mating surfaces aren't in line with each other so when tightening a different way creates a bending pressure on the cap which breaks them . That's the reason for the "up" arrow.

Maybe a dismantler will have and bent fork with a good cap , otherwise new is all there is if you can't make one .
__________________
'86 XT600/3TB motor,,, '88 XT600, ,,'92 XT600e,,, '08 Husky TE510,,, '05 DRZ463,,, '95 KLX650 ,,,'96 KLX650
Reply With Quote
  #4  
Old 31 Aug 2018
xtrock's Avatar
Registered Users
Veteran HUBBer
 
Join Date: May 2013
Location: Norway
Posts: 1,364
Biggest problem is that alot of homemechanics think they have torque wrench in the arm and overtighten or underthighten screws and bolts all over, this one is only 10nm and i bet this one had alot more pressure and wont crack at 10nm.

BTW it was sale on the holder i gave link up here, so its a bit more expensive now.
Reply With Quote
  #5  
Old 31 Aug 2018
R.I.P. 25 November 2021
Veteran HUBBer
 
Join Date: Feb 2010
Posts: 688
I had one of my XT`s with exactly the same crack, toss it in the bin & do not think of welding it.

Mezo.
Reply With Quote
  #6  
Old 31 Aug 2018
Registered Users
Veteran HUBBer
 
Join Date: Jul 2016
Location: Obidos, Portugal
Posts: 134
The bike was pretty trashed when I got it and every stage of the rebuild has thrown up some example of bad treatment by previous owners. The front end is the last stage though so hopefully the last unexpected expense. Amazing what you find once you get the corrosion off. I've found a Yamaha original at Wemoto which is cheaper with more sensible postage so will be going for that. Thank you as always for the replies and the expert insights you guys bring to this site.
Reply With Quote
  #7  
Old 31 Aug 2018
xtrock's Avatar
Registered Users
Veteran HUBBer
 
Join Date: May 2013
Location: Norway
Posts: 1,364
Didnt know they had original parts like that, send link so others can use it.
Reply With Quote
  #8  
Old 1 Sep 2018
Registered Users
Veteran HUBBer
 
Join Date: Jul 2016
Location: Obidos, Portugal
Posts: 134
It's https://www.wemoto.com/bikes/yamaha/xt_600_e. I've had stuff from them a few times in the past and it's always worked out great. The site is not great for searching though - I'd already looked there for this part (and not found it) until I thought of searching by part number.
Reply With Quote
  #9  
Old 1 Sep 2018
xtrock's Avatar
Registered Users
Veteran HUBBer
 
Join Date: May 2013
Location: Norway
Posts: 1,364
One of few parts they have same price as OEM, good thing is they remove VAT and have cheap shipping. Other parts are more expensive so compare before buying.

Please Note: Prices are in British Pound (£). Delivery charge to your country is an estimate, we will contact you if there is a difference in price.
Reply With Quote
  #10  
Old 1 Sep 2018
Registered Users
Veteran HUBBer
 
Join Date: Oct 2016
Location: Devon, UK
Posts: 836
Don't try and repair it. Welding aluminium isn't as simple as puddling a bit of metal along the crack. The grain structure changes and becomes brittle alongside the weld and will soon break again. Get a new one if possible, uncracked secondhand otherwise, and tighten it as jjrider said.
Reply With Quote
  #11  
Old 2 Sep 2018
Registered Users
Veteran HUBBer
 
Join Date: May 2013
Location: Wisconsin, USA
Posts: 827
possible fit ,

https://www.ebay.com/itm/YZ250WR-YAM...dbPA5v&vxp=mtr
__________________
'86 XT600/3TB motor,,, '88 XT600, ,,'92 XT600e,,, '08 Husky TE510,,, '05 DRZ463,,, '95 KLX650 ,,,'96 KLX650
Reply With Quote
  #12  
Old 2 Sep 2018
xtrock's Avatar
Registered Users
Veteran HUBBer
 
Join Date: May 2013
Location: Norway
Posts: 1,364
Quote:
Originally Posted by jjrider View Post
Same as my link..He already bought new from wemoto.
Reply With Quote
  #13  
Old 29 Sep 2021
Registered Users
Veteran HUBBer
 
Join Date: Mar 2013
Location: London
Posts: 178
Just reopening this thread - I recently discovered similar cracks on the axle holder on my 34L XT600Z with 4PT forks.

Found this aftermarket replacement that I’ve ordered - https://titanclassics.com/product/al...-3xj23167l000/

The WeMoto part is no longer in stock.

Ed


Sent from my iPhone using Tapatalk
__________________
Where Next Barney? Buenos Aires to Lima 2015 | London to Sydney 2015/6 | Armenia, Georgia & the FYR 2022 | Algerian Sahara 2023.
Reply With Quote
  #14  
Old 29 Sep 2021
Registered Users
Veteran HUBBer
 
Join Date: Mar 2013
Location: London
Posts: 178
Quote:
Originally Posted by edwardbgill View Post
Just reopening this thread - I recently discovered similar cracks on the axle holder on my 34L XT600Z with 4PT forks.

Found this aftermarket replacement that I’ve ordered - https://titanclassics.com/product/al...-3xj23167l000/

The WeMoto part is no longer in stock.

Ed


Sent from my iPhone using Tapatalk



You can just make out the hairline crack below the top holes, about 80% across from the left and above the bottom holes, about 30% across from the right.


Sent from my iPhone using Tapatalk
__________________
Where Next Barney? Buenos Aires to Lima 2015 | London to Sydney 2015/6 | Armenia, Georgia & the FYR 2022 | Algerian Sahara 2023.
Reply With Quote
  #15  
Old 29 Sep 2021
Grant Johnson's Avatar
HU Founder
Veteran HUBBer
 
Join Date: Dec 1997
Location: BC Canada
Posts: 7,300
Quote:
Originally Posted by edwardbgill View Post

You can just make out the hairline crack below the top holes, about 80% across from the left and above the bottom holes, about 30% across from the right.


Sent from my iPhone using Tapatalk

Thanks for the update!
__________________
Grant Johnson
Seek, and ye shall find.

------------------------
Inspiring, Informing and Connecting travellers since 1997!
www.HorizonsUnlimited.com
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Armband as gps/smartphone holder ccaa Equipment Reviews 7 19 Feb 2016 17:52
Help KLE 500 removing rear axle. dave.c. Kawasaki Tech 3 30 Oct 2015 17:52
Bottle Jack for a Defender axle? roamingyak Equipping the Overland Vehicle 4 14 Apr 2015 01:24
DL 6540 Rear Axle Nut cycleman Suzuki Tech 0 13 Dec 2014 01:17
XT600 rear fender / plate holder mod fraserbyrne Yamaha Tech 15 22 Sep 2012 09:50

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

ALL Dates subject to change.

2024:

  • California: April 18-21
  • Virginia: April 25-28
  • Germany Summer: May 9-12
  • Québec: May 17-19
  • Bulgaria Mini: July 5-7
  • CanWest: July 11-14
  • Switzerland: August 15-18
  • Ecuador: August 23-25
  • Romania: August 30-Sept 1
  • Austria: September 12-15
  • France: September 20-22
  • Germany Autumn: Oct 31-Nov 3

2025 Confirmed Events:

  • Virginia: April 24-27 2025
  • Queensland is back! May 2-4 2025
  • Germany Summer: May 29-June 1 2025
  • CanWest: July 10-13 2025
  • Switzerland: Date TBC
  • Ecuador: Date TBC
  • Romania: Date TBC
  • Austria: Sept. 11-15
  • California: September 18-21
  • France: September 19-21 2025
  • Germany Autumn: Oct 30-Nov 2 2025

Add yourself to the Updates List for each event!

Questions about an event? Ask here

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

Adventurous Bikers – We've got all your Hygiene & Protection needs SORTED! Powdered Hair & Body Wash, Moisturising Cream Insect Repellent, and Moisturising Cream Sunscreen SPF50. ESSENTIAL | CONVENIENT | FUNCTIONAL.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 00:44.