hi there if you have a nut/bolt stockest near to you see if they can match the stud up , threaded rod or studding as it is called is normally low grade steel unless you ask for high tensile studding . if you are going to go for full thread and not a stud , ask for a hex set screw and cut the hex head off. a good one will be 8.8 strenth dont get one lower than this . the next one up is 10.9 then 12.9, very strong , with stainless nuts on and coppergrease no more seizing should happen. any bike shop should be able to match the stud up if they keep them in stock, honda/suzuki/etc or just order the right ones from your local yamaha dealer . good luck zigzag
|