Clutch trouble and maybe more
Hi Guys.
My 2003 xt600 appears to have eaten its clutch release bearing. After a long lay off i got my bike on the road again. The clutch was a bit noisy and when the bike got warm gear changes became difficult and it seemed like i could hear the plates themselves being thrashed as i let out the clutch.
I drained the oil and removed the clutch and found small roller type bearings and bits of twisted metal in the sump. The only part i couldnt find was the release bearing so im guessing the bits i have are the remains of the bearing.
I have a new clutch kit and bearings on the way but im obviously concerned that swarf has found its way to other areas of the engine. Any advice from you knowledgable folk on what my next course of action should be. Is this the end of my engine?
Any help much appreciated
Bill
|