Hi Steve,
Thanks for your query. I am still trying to get it sorted.
The CDI I bought was quoted as "a direct plug in replacement for the original". I noticed early that the safety circuit was missing from it, and the company did a little research and developed the safety circuit before delivery.
When it arrived, the 3 safety circuit wires were bare, hence my post.
What I found last weekend was the larger 3 wire connector was different (I should have checked earlier). It may be a date related thing - on my '88 wiring loom the large 3 wire connector has round pins, and the small 3 wire connector has blades (2.5mm). However the modern connectors I have seen have pins in the small and blades in the large - the designs are the other way round.
I think I am going to cut all the old pins/connectors off of the 2 CDIs I have and the wiring loom, and fit new plugs.
Geoff
|