float level
Sander,
The two values are different:
1. Floatheight 27 - 29 mm: measure with float bowl off, carb upside down, then distance between float bowl mating face and top of float must be 27 - 29 mm.
2. Fuel level 6 - 8 mm: as Pigford says, with running engine the fuel level above the float bowl mating face (carb installed of course) to be 6 - 8 mm.
The first one works for me.
While opening the float bowl, did you check the little filter on top of the float needle seat, better to remove anyway. When this is blocked it gives the symptoms as you described at first (stops at highway speeds, starts again etc)
Good luck
Auke
|