Quote:
Originally Posted by Doubleyoupee
Funny, I just replaced my XT600Z carb boots (intake) with aftermarket ones today.
They fit perfectly. They have 43F marked on them as well as 1VJ.
Regarding angle, make sure the right one points outwards. Mine went outwards by 1mm but it's hard to see.
I have the vacuum operated ones. That vacuum tubed one goes on the left
edit: i just realized you are talking about carb<>airbox?.. since you are talking about the alignment...
Sorry can't help you there. Still using the stock ones
|
I brought the cheapest one from aliexpress and found the clutch side boot not as angled and looks straight. The previous set had 43F marked on them slightly longer but didn't last long before the rubber separated ..... I loosened the airbox bolts and managed to find a couple of mm just enough to clamp the ducts..... possibly the age of the rubber ducts shrinking..
Cheers
|