Quote:
Originally Posted by steele
I tested the battery and is got 12.73v ,ive now pulled all plastics,seat and tank off looking for a loose wire/connection with no success i dont know where to go from here. Any ideas on the most lilely place to check?
thanks steele
|
Attach the meter directly to the battery, try to start and see how low the voltage dips.
I can't say exactly which voltage still is good, but if it dips below 10-11 volt then the battery is bad.
Attach the meter to the + terminal on the battery, start, and watch if the voltage dips below 10-11V, if yes, then the terminal is loose or corroded.
attach to minus terminal, start and see if there is any rise in voltage, if yes, then the terminal is loose or corroded.
if the voltage on the battery or terminals, is higher than 10-11 volt, then measure directly on the starting relay. If voltage dips below 10-11V, you have a bad connection from the battery to the relay.
__________________
Poul
May you enjoy peace and good health !
|