Not the same model bike but I bought a klr 650 whose lender had run it out of oil to the point the cams siezed in the head and literally smashed their way out. I put a second hand head on without touching the bottom end and it had run fine for 60,000kms since then. So thats the best case outcome, and if you're lucky you may be in the same situation. Roller bearing bottom ends are very resilient and will survive on very little oil. If your engine still turns over over smoothly and selects gears fine you are possibly ok and in that case it's probably unlikely that anything will then fail dramatically, rather at worst you'll feel increase vibration over time indicating a deteriorating bearing. Good luck
Sent from my SM-P350 using Tapatalk
|