I have 3 pieces of different-gauge wire in my handlebars which is about as much as will slide in with a bit of work.
Others have mentioned a siphon hose which is a good idea too. I've never needed either the wire or a siphon hose (although I have run out of gas from even the 20-liter tank and I have fixed electrical faults during trips).
I like to imagine that the wire is in there tight enough to reduce handlebar vibration since it has a different natural vibration frequency. I have no proof that it actually works, but I'll imagine it anyway. The handlebar vibes on my thumper are less than a couple of my twins.
It should be possible to put both a wire and a siphon tube in a handlebar.
|