Quote:
Originally Posted by Frank Warner
It has to look original - bolted not zip tied!.
Why not use the original boxes ? ... you might find some space inside.
|
Most electronics are covered in an epoxy potting compound that protects from vibration and prevents repair over replacement. You'd wreck the box getting in there.
A nice empty electronics case from Maplin/RS/Radio Shack would save the hassle IMHO. How about using the wires to run an LED? It'll look like part of the alarm or a TDC contact on an aftermarket electronic ignition box.
Personally I pull the rubber bung out of the subframe tube and use that space.
Andy
|