Hello all,
I know it's late but thought I would explain what the situation was.
The whole problem was just that I'd failed to reconnect a tube to the map sensor. This was causing the start issues and warning light.
What I didn't know was that the light remains on until the engine has gone through a couple of heat cycles after a problem has been resolved, so after reconnecting the tube and finding the light was stlll on, I completely dismantled the airbix and refitted the spark plugs a second time trying to find the remaining "problem" that was causing the light to stay on
Eventually learned of the light staying on on the Tiger 800 forum and sure enough, after a couple of short rides it switched off.
So, lesson learned is, when doing something for the first time, I'll write down the steps as I go and cross them off as put everythnig back together - a bit time consuming, but not as much as doing the job twice trying to find what you missed the first time.
|