Hmm I cleaned the air filter recently, but because I can't get foam air filter oil here I've been using k&n. Is it possible that is not letting enough air through or that I used too much. Alternatively is there any other reason it might not be getting enough air?
(Edit: Thumpertalk, contrary to the standard instructions to have a 'well oiled filter' seem to recommend squeezing out as much oil as possible after application, so I'll try that, change the spark and not just clean it, and drain/clean the tank anyway and hope for the best. I'm mostly worried if it's an indicator of some part failure - I've heard anything from starter to float - as it'll take about a month to get parts over here.)
Last edited by hsinclai; 17 May 2018 at 22:35.
|