Thanks for info. I'm pretty sure I had the big shiny bit at the front
I've just picked up the repaired lens and serviced camera today (after 6 weeks). The lens had a broken 'FPC' - a printed circuit board apparently, which is good in that the motor & mechanical focusing bit was ok but strange that a circuit board broke at all.
The camera was fine. I've never had any problems with the D lenses or cameras before - they do seem to bounce quite well.
I'm just worried about it on the corrugations - if it happens again I'm buggered - well, sort of.
I guess there's only one way to find out ...
|