It's time to update again: The last one was at 85,000 KM... I am now up to 122,000 KM....
My auto decomp cam is now worn out so I use the handlebar lever to assist on cold starts... I've replaced the needle jet/jet needle again due to wear..Replaced the chain sprockets a few more times{since 85,000}... Replaced the suspension dog bone link due to wear.. Replaced the exhaust follower roller and rebuilt the waterpump as well....
Over the winter I plan to do a bit of engine work:
Replace the camshaft, camchain and sprockets.... Replace the intake follower and piston rings... Replace the clutch, check and replace {if required} the oil pumps and the oil bypass piston spring.... Measure gear shaft and crankshaft slop and replace bearings if required.... Send the head in for valvework....
Last edited by Island Hopper; 22 Aug 2010 at 01:05.
|