When I first saw tje pictures I immediately thought of side stand damage. As I've experienced side stand wear on swingarm on a DR650. The passenger peg being the culprit would be right.
Repair the foot peg & bracket.
As for welding thevswing arm, that's what I did.
Use alu welder to fill damage area & then add extra support by welding a plate over damaged area. But be warned that unless the swingarm is properly supported during this process it will bend out of alignment & you may end up unable to insert the axle through swingarm & wheel.
Sent from my GT-I9295 using Tapatalk
|