KLE signals
Hello Kumuya.
Nice to see u are still around. If all turn signals stopped working, you might have a loose earth wire somewhere. It is the only common point among them if your signal relay is working. If the relay is not working, check the connectors under the tank. I have had a few problems with those.
Just a tip I got from Nicki. If you take any bolts loose, add Loctite when you refit them.
I had the screws of my camera's body come out while it was wrapped in cushioning in the back box. The vibration gets worse the further you get away from the centre of the bike.
Happy travels.
__________________
Pleco
If its stupid, but it works, it aint stupid.
|