KLE problems
Hello there.
I had a problem where the bike would have a flat spot at about 6000RPM. Very annoying if you want to take a gap. The rubber connecting the carb to the head had come loose, and this caused the lack of performance. Refixed the clamps, and all sorted.
I currently have a problem that if I ride at constant revs for about 200m, and then open the throttle fully, the bike smothers and dies on me. Very frustrating. Does anybody have any ideas. (not the vacuum hose on the tap. does the same at prime. not dirty fuel changed that. will be trying to clean the tap next.) I am loosing both cylinders at the same time, and I do not think both carbs can go faulty together overnight. Any ideas would help.
__________________
Pleco
If its stupid, but it works, it aint stupid.
|