Hello,
By this time i took the bike apart and found out i need new pistonrings,etc...
The big question is which option do i take?
1. Rebore the cilinder and use an oversize piston with rings and new gaskets
2. Put a whole new sleeve with the original diameter and use the old piston with new rings
Another thing is :do i put a new cam chain or do i leave it.
Do i need to change the black plastic guides as well?
If ai have to change all this it's gonna be a pretty expensive bill a guess?
Anyone, who can give me some agood advice?
It's pretty urgent !
Thank you,
Cheers, Bossit
[This message has been edited by Bossit (edited 10 April 2005).]
|