Darrin, if the switch if working (which it is), then just take the barrel off/out, then you can operate it with a screw driver. Take the steering column surround off and take the switch apart from the key end. You should be able to simply slide out the barrel (look at it and figure it out!!). Then the switch (the white plastic bit) has a nice slot in it for the barrel or screw driver!
Or (don't get this wrong!) cut all the wires off the switch and figure out what they all do. Put an on/off switch on the ignition, then a push button on the starter. Or just mess about twisting wires together when you want to start it and keep it going. But if you mess this up you could set the whole vehicle on fire!!
Bye!!
__________________
www.mattsavage.com
VIAIR - 12 & 24 volt compressors and systems. Tyre levers, Land Rover parts, Sand Tracks, Allisport Intercoolers, Overland Prep, and much more...
|