Take care when you do things for the first time, or where you have not done them for a while. You need to remember how things were placed .. perhaps take a few photos as a guide for reassembly.
Cush drive rubbers ware. You may not find ready replacements. I've used silastic (RTV 732 but really any of these products would do) to make 'repairs' to these rubbers with some success. But take your time and do it right. The rubbers sit into something, a thin grease coating on that something before using the silastic will make removal easier. The silastic is used together with the worn rubbers - not as a total replacement. You use the fitting to form the silastic into the right shape. Leave the fresh silastic for say 24 hours before use to let the silastic set.
|