Hi Martin,
The ABS failure caused the ABS to be off all the time so it was not possible to toggle the ABS (with the ABS button on the handlebar) during the failure.
On a bike with working ABS if you toggle the ABS off then the brake lights will work. They should always work, but check this, if not then you have a problem.
The problem with my bike and the ABS failure is that the error code (10220 when interrogated with GS-911 diagnostic tool) said that the CANbus didn't communicate to the ABS unit, it just timed out. The CANbus interpreted this as a brake failure so failed to interpret the brake switch activation on front and rear of the bike. Again all this was related the the ABS failure.
End result of all this complex ABS integration meant:
- no odometer
- no speedo
- no brake light
- and of course no ABS
IMHO this is a poor and very dangerous design, to have speedo and especially brake light dependent on the ABS unit.
Cheers,
Pascal
|