XT600e rebuild questions
Hi all
I’m just finishing my rebuild of a 2002 600e, but due to the project taking longer than I’d hoped and the manual I have being not an exact match I have a few niggling questions I’m hoping can be answered.
1. On the right of the carb there’s a pipe with a barrel shaped object in the end. Can’t find a home for it - any help?
2. Bottom of the airbox, right hand side is a pipe which I think would be to the bonked off inlet manifold. Where does this pipe go? Is it just a drain now? Seems odd to leave it open.
3. I have a plastic/rubber bung, about 6mm OD. Can’t find a home - thought it was is the battery box but nope. Any ideas?
4. Do I have to cross the throttle and choke cables on the top of the bars or can the drop down own side and cross in between the trees?
5. The airbox to carb tubes show signs of sealant but this isn’t mentioned in the manual. Do these need sealing again?
Sorry for the long post - want to get this finished now.
Thanks in anticipation,
Jim
Last edited by Jimbob181; 25 Aug 2020 at 23:57.
Reason: Added photo
|