1 yep just pass it through frame so sits on top of airbox. Make sure the small foam filter in the end is clean and oiled
2 This is the crankcase breather hose, should go to the top of the crankcase on LHS. Should be a short piece of pipe protruding from crankcase to put pipe on. Smaller hose should go to crankcase next to that hose, this being the oil tank breather hose
3 Possibly from airbox drain pipe at bottom of airbox. should be a small bit of clear pipe with a bung in it.
4 Throttle/ clutch cables? Ive never seen an XT with clutch actuating lever on the RHS of crankcase as we never got them in oz but I would think would cross over at top of bars so there is a smooth run for the cables where they have to go. You want the cables to not have any sharp bends for free movement.
5 Shouldnt be any sealant anywhere on the airbox tubes. Possibly from a previous repair?
|