I have my buggy that i built a while ago, ive been running xt600 engines in it and it has been great. But the only problem was if you stalled it you had to unbuckle the 3 point harness, undo the arm restraint mesh and go round kick start it and strap yourself back in! Now after a while this gets abit annoying!


So i purchased my new engine off a nice chap off ebay who said it has an electric start off a TT600, these engines are practically the same so i thought there would be no problem! I thought wrong! The wiring in the engine is different from an xt as it only has 3 white wires to the rectifier, one blue wire for the neutral indicator and 2 wires from the pick-up coil. It doesnt have the red and the brown wires for the charge for the coil!

Im no expert on electrics, i made myself a little harness for my previous xt600 engine and it worked fine but now i have to make a new one, now im stumped about where the charge for the coil comes from, i have the wiring diagram for the tt600 but its like talking german to me looking at it! I need HELP!

With my great artistic skills ive made a diagram on paint! which shows what i have and need wiring together and was hoping greatly if some one could point me in the right direction of what could possibly work or what i would need for it to work! Any help is appreciated as im getting depressed looking at it and not being able to use it! The CDI unit is off an xt600.

Here is little video of her in action
YouTube - Sidewinder Buggy - Day out in the mud!