You haven't done anything that everyone that rebuilds one of these motors starts with . What I do is pour roughly 1/2-2/3 quart oil in the motor through rocker cover caps , then the rest in the tank. Then I use 30wt or 20w-50w and squirt a bunch down a couple of the oil lines and check bolts , then start it up quickly . The motor can take a few seconds with no oil and by then it should prime up with the rpms . Keep the one bolt loose to see that oil is flowing .
__________________
'86 XT600/3TB motor,,, '88 XT600, ,,'92 XT600e,,, '08 Husky TE510,,, '05 DRZ463,,, '95 KLX650 ,,,'96 KLX650
|