There is 2 lengths , one side is supposed to get something like 10mm longer than the other, I can't remember for sure but I think the cam chain side gets the shorter ones but not positive . Just put the bolts down the holes , they should all end up with the same amount of threads being threaded into the case.
If you have 3 different lengths and it has been a mixed up pile of bolts I'd recommend getting 4 new bolts from Partzilla .You want to know you have enough threads holding the torque, any that may not be from this motor may not be long enough, plus they technically are one time use bolts anyways I believe ,and bolts that have a questionable past may be best to replace .
|