Here it is...
After considerable effort, here are the settings:
Front forks : Rebound- carefully turn top screw clockwise with appropriate screwdriver until it hits the stop- you will feel it- don't force it!
Then back out the screw the appropriate number of "clicks".
STANDARD: 15 clicks OFF ROAD: 12 clicks.
Compression- remove rubber caps from bottom of fork leg, screw all the way in till it stops, back out the apt no. of clicks.
STANDARD: 12 clicks OFF ROAD: 3 clicks.
Rear shock : Compression- locate top adjuster on Ohlins resevoir unit, turn clockwise 'till it stops the back out...
STANDARD: 18 clicks OFF ROAD: 10 clicks
Rebound- Locate bottom adujster on shock unit, tighten to stop, back off....
STANDARD: 18 clicks OFF ROAD: 9 clicks
Pre-load is set at 18.5 mm from top edge of top ring to top edge of upper adjusting lock-ring. (75kg rider)
Of course you may feel that you need to fine-tune these settings, good luck.
|