Quote:
Originally Posted by oldbaldrick
Check the valve clearances.
If there is no clearance when they are cold, then after about 3 minutes they will expand sufficiently to hold the valves open and stop the engine due to lack of compression.
|
Hi folks,
Thanks for your replies, I ve not been near the bike for a few days, busy with other stuff. I took the carbs off and checked all the settings, I'll check the valve clearances again today.
My relationship with my XT is deteriorating fast! Valves certainly make most sense, as the top end was the thing that was changed during the overhall.
Here goes again!
Pete
|