xtremity afaik the marving is not performance enhancing. It should pass the M.O.T though and I like the chrome look. It's a couple of kilos lighter than the stock but no way to get inside the marving if you wanted to.
I used the same chain with the 14/47 sprockets.
For me I love to ride on twisty country lanes, there are loads near me. I am not interested in high speeds. Just to test it today it goes 80 at 6000 RPM but I spend most my time at between 30 and 60 mph.
I actually want to try 13/50 sprockets if they do them to fit the XT600E, anyone know?
Bike runs smoothe, throttle response still feels good after the modifications (headers, silencer, snorkel off, piperx filter, iridium plug), no lurching or stuttering. Just the occasional pop when riding downhill with no throttle and when letting off from full throttle.
It may be because there was no room to fit a gasket between headers and sliencer but the clamp is very tight.
My air/fuel screw was exactly 4 turns out, I tried 4 1/2 and 5 turns out.
Still runs the same.
|