Xt600 Misfires, then cuts out... Help Needed
Hi Everybody!
I recently bought myself a poor running 1984 XT600 34L.
The original symptoms was:
Won't run at full throttle
Idles bad when hot.
Thinking that this would be a doddle to fix I bought the bike.
Well, not it has turned in to quite a headache. So I need some of your wisdom.
The symptoms are now the same.
Here are two videos, one is when the bike is just started. Then it will run with no problems, when it gets to operating temperatures, it misfires, cuts out etc.
When it does this, it can be hard to start it again.
http://youtu.be/HGipgiK3Xj0
http://youtu.be/_FgNRz8LKdk
Well I have done the following.
Cleaned out the carbs
Measured Pickup
Measured Source Coil
Measured Ignition Coil
New rubber intake boots incl. o-rings
New sparkplug
New CDI
Checked the ground-connections for CDI, Coils etc.
Checked Valve clearences
After all this the symptoms are exactly the same..!
I am thinking that this is Ignition related since it gets hard to start after cutting out because it sucks in fuel while stumpeling and therefore drowns.
Please let me know if you have any good ideas to what this might be...
thank you
jonas
|