Just have to ask
It's just drilled the diameter of the plunger outer piece then has a flat bottom for the spring. The wall on the back side is maybe 1 to 1.5mm thick.
Once the whole part is out on mine I see air or grease from that hole in the back won't have as much push as it could because of where the hole is , though all that is holding is 1mm of that endcap if the plunger is moving , if the plunger is also stuck then there is quite a bit more holding. It took quite a bit of force to get mine out here , and my plunger was loose and working, just that cap was tight as heck.
|